Retest workflow after rohs reach testing failure: part 3
A retest only clears goods it genuinely covers with methods equal to or stronger than the original failure. Buyers earn that clarity by scoping the retest around the suspect material, comparing the two reports line by line, and filing a closure package that reconstructs the whole episode. This guide explains how to do each of those well, including where CE-related documentation fits.
Key takeaways
- A retest can only supersede the original failure for goods it actually covers with equal or stronger methods, so scope it deliberately. [1]
- Comparing old and new reports line by line on components, methods, and sampling basis prevents false clearance.
- A repeated failure on the same material redirects effort from finished-goods testing to supply-chain correction.
- CE marking rests on manufacturer conformity assessment, which test reports support but never replace. [2]
- Closing the file means a memo plus the full evidence stack, filed where future inquiries can find it.
Parts 1 and 2 of this series covered failure classification and the containment-to-investigation sequence. This third part handles the moment the new laboratory result arrives: scoping the retest so it can actually answer the open question, reading it against the original failure without wishful thinking, and closing the file so the decision survives later scrutiny.
The regulatory backdrop matters here. The RoHS directive restricts specific hazardous substances in electrical and electronic equipment placed on the EU market, and public references describe its substance scope and the conformity expectations manufacturers work within. The CE marking, in turn, signals that a product meets applicable EU requirements, with documentation behind it. Independent testing supports that documentation; it never substitutes for the manufacturer's own conformity responsibilities.
This guide keeps the two halves connected. Technical scoping decisions about which components and methods the retest must include sit alongside documentation habits that keep CE-related files coherent. Buyers who handle both halves well turn a failure episode into a stronger file rather than a lingering doubt.
Scoping the retest so it can answer the question
Every retest inherits a burden of proof: it must show that the goods it covers, tested at least as rigorously as before, now meet the requirement. That means the retest plan names the suspect components explicitly rather than hoping a general sweep happens to include them. It also means ungrouping anything that was grouped in the original run, because a pass on a composite cannot specifically clear the component that failed. The RoHS substance framework gives this discipline its subject matter, defining which restricted substances the retest must address for covered equipment rather than leaving the target vague. [1]
Method parity deserves explicit attention in the commissioning note. If the failure came from confirmatory chemistry, the retest should use confirmatory chemistry on the same material type, not a lighter screening pass presented as equivalent. If the failure involved a specific homogeneous material, the retest should isolate that material rather than blending it with clean neighbors. Buyers who commission independent restricted substance testing for the retest run typically spell out these terms in writing first, so the laboratory quotes against the right scope instead of a generic panel.
Sampling parity completes the triangle. The retest draws fresh units under a written rule that reflects the investigation, covers every held lot the decision must clear, and reconciles unit IDs between field and lab. A retest on hand-picked golden units proves nothing about quarantined cartons, and everyone reviewing the file later will ask exactly that question.
Reading the new report against the old one
| Comparison axis | Original failure | Retest must show | If it does not |
|---|---|---|---|
| Components covered | Failed line plus context lines | Same failed component isolated, plus affected siblings | Narrower coverage cannot clear wider failure |
| Test method | Screening or confirmatory as stated | Equal or stronger method per line | Weaker method downgrades the conclusion |
| Sampling basis | Original lot and rule on record | Fresh units, written rule, reconciled IDs | Unreconciled units describe unknown goods |
| Verdict direction | Fail on specific material | Pass on that material with margin shown | Marginal pass near threshold needs judgment |
| Documentation | Failure memo and hold record | Corrective note linked to both reports | Unlinked reports invite double counting |
When the retest fails again
A second failure on the same material is information, and valuable information at that: the problem is systematic rather than incidental. At this point the highest-return move is upstream, examining supplier declarations, incoming inspection records, and the factory's material substitution controls. Two failures on finished goods with no change in inputs will reliably produce a third, so redirect the budget toward finding where the nonconforming input enters production.
This is also the moment to review declaration paperwork with fresh eyes. Supplier statements about material composition need dates, scope, and test backing to carry weight; undated blanket assurances covering everything ever shipped deserve skepticism. Where declarations and laboratory findings conflict, the laboratory finding governs the shipping decision while the declaration conflict becomes a supplier-management issue to resolve separately.
Filing a closure package that survives scrutiny
What the CE context requires of your files
The CE marking on covered products reflects the manufacturer's claim of conformity with applicable EU requirements, supported by technical documentation the manufacturer holds. Third-party reports feed into that documentation as evidence, particularly for restricted-substance requirements, but the marking itself remains the manufacturer's responsibility rather than the laboratory's or the inspector's. Public references on CE marking describe this structure: a visible mark backed by assessment and documentation proportionate to the product's risk profile. [2] Buyers contribute by keeping their own files consistent, so purchase, inspection, and test documents tell one coherent story if a market authority ever asks.
The closure memo and the stack beneath it
Write a one-page memo that states what failed, what the investigation found, what corrective action the factory took, what the retest covered, and which lots are released or rejected on that basis. Beneath the memo, file the original report, investigation notes, corrective record, sampling sheets for both rounds, the retest report, and the disposition log. Future you, or a customer auditor, should need no oral history to understand the episode.
Never let a retest quietly replace a failure in the file. Keep both reports, link them with the investigation memo, and record exactly which goods each document covers so no future reader mistakes one population for the other.
Sources
- Wikipedia: Restriction of Hazardous Substances Directive —— Overview of the RoHS directive restricting hazardous substances in electrical and electronic equipment.
- Wikipedia: CE marking —— Overview of CE marking as conformity marking for products sold in the European Economic Area.
Frequently asked questions
How do I compare the retest report with the original failure?
Compare them line by line on three axes: which components were tested, which methods were used, and which sampling rule produced the units. A retest that covers fewer components, uses weaker methods, or draws from a narrower lot cannot overrule the original failure. Only a retest that matches or exceeds the original on all three axes can supersede it for the goods it covers.
What if the retest fails again on the same component?
Widen the investigation, not the wishful thinking. A second failure on the same material points to a systematic input problem, so shift effort from testing finished goods to auditing the material supply: supplier declarations, incoming batch records, and the factory's substitution controls. Repeatedly retesting identical goods while the input stays unchanged wastes budget and delays the corrective action that actually resolves the issue.
How does a retest relate to CE marking obligations?
The CE marking indicates the manufacturer's declaration that the product meets applicable EU requirements, and restricted-substance compliance is part of that picture for electrical and electronic equipment. A test report supports the technical documentation behind the marking but does not replace the manufacturer's overall conformity assessment. Keep reports, declarations, and bills of materials aligned so each document corroborates the others.
What does a properly closed failure file look like?
A short closure memo plus the full evidence stack: original report, investigation notes, corrective record, re-sampling sheet, retest report, and the disposition decision for every held lot. Someone unfamiliar with the case should be able to reconstruct what failed, what changed, and what the final result covers. File it with the shipment records so future inquiries get answers instead of archaeology.
See the runtime on your own stack.
30 minutes with a solutions engineer. No deck — a working walkthrough.